ULTRA Industrial Wireless Water Plus Detection Sensor with 10 Foot Wire (900 MHz) 2 Prong Wire Water Detection CoverPart Number: E2ES2-9-IN-WS-WD-L10-WP
ULTRA industrial wireless water sensors alert you via SMS text and/or email when there is water detected, preventing potential property damage that results from flooding or leaks. Place this sensor anywhere flooding or faulty plumbing could cause a problem. This sensor can also be used to detect a lack of water, allowing you to know when a container is nearing empty.
An optional "Detect Plus" spot detection probe can be added to the end of the water detection wire. The spot detection probe can be positioned and mounted at a set distance above the ground eliminating false alarms.
ULTRA - Leading Enterprise Grade "Internet of Things" Solutions
ULTRA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ULTRA sensors to have better interference immunity from other wireless devices.
Superior power management provides ULTRA sensors with almost twice the battery life of E2E’s standard wireless sensors.
- Coin cell sensors typically last 3+ years.
- AA and Industrial sensors typically last up to 12+ years.
Integrated on-board data storage allows ULTRA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow ULTRA products to be updated remotely if new fixes or features become available.
E2E ULTRA Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).
An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.
Lead Length - 3 foot wire Description:
3 foot wire
- Senses immediate presence of water.
- Can also sense non-presence of water.
- Use for detection of any non-combustible liquid.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
What does this wireless sensor's data look like in software?
Wireless Water Detect Sensor Specifications
|Lead Wire Length||3 ft. ( 36 in.)|
|Detection Wires||High Impedance|
ULTRA Industrial Specifications
|Supply Voltage||2.0 - 3.8 VDC|
|Battery Type||Replaceable 3.6V, 1800mAH (single AA sized)|
|Battery Life||Up to 10 Year Battery Life.**|
|Max Operating Temperature||-40° to 85°C (-40° to 185°F)|
|Optimal Battery Operating Temperature||+10°C to +50°C (+50°F to +122°F)|
|Solar Power Option||3.0 VDC Solar Panel
600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
Charging Temperature Range: 0° to 45°C (32° to 113°F)
Max Temperature Range: -20° to 60°C (-4° to 140°F)
|Enclosure Material||IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure|
|UL Rating||UL Listed to UL508-4x specifications (File E194432)|
|Dimension||3.7 in x 2.32 in x 1.38 in|
ULTRA 900 MHz Specifications
|Operating Frequency||900 MHz Operating Frequency|
|Certifications||Complies with Part 15 of the FCC Rules.
Complies with Industry Canada standards.
|Device Range||Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*|
|Security||Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)|
What's in the box?
- Wireless Sensor
- Mounting Hardware
- 3V Industrial Battery (Pre-Installed)
- SMA Antenna