ULTRA Industrial Wireless Voltage Meters - 0-200 VDC with Solar Power (900 MHz)

ULTRA wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.

Examples of interfacing devices include, but are not limited to: Strain Gauge, Pressure Transducer, RTD, Thermistor, or Thermocouple, Piezo Electric sensors, Photoresistor, Industrial Accelerometer, any kind of variable resistor, any kind of sensor that outputs a voltage, etc. If the device being measured is passive, the user must supply their own excitation voltage, as the E2E sensor is really just a “voltage observer”. Cannot be used for AC voltage measurement.

Product Information

ULTRA - Leading Enterprise Grade "Internet of Things" Solutions

ULTRA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,200+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ULTRA sensors to have better interference immunity from other wireless devices.

Superior power management provides ULTRA sensors with almost twice the battery life of E2E’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 12+ years.
ULTRA products employ E2E's Encrypted RF Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

Integrated on-board data storage allows ULTRA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow ULTRA products to be updated remotely if new fixes or features become available.

E2E ULTRA Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.


Notes: 

WARNING: Use caution when interfacing to the E2E Wireless Voltage Meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 250V WILL DAMAGE the electronics of the E2E Wireless Sensor. E2E is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.


Product Features

  • Interfaces with batteries and devices up to 200 VDC
  • Sensor resolution of 0.01 VDC
  • Sensor accuracy of +/- 1%

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.


What does this wireless sensor's data look like in software?

E2E Wireless Voltage Meters - 200 VDC - Data View in Software
Product Specifics

Voltage Meter Specifications

Voltage Resolution 0.01 VDC
Full Scale Voltage 0-200 VDC
Absolute Maximum Voltage 250 VDC
Accuracy @1V or above: +/- 1% (0.5% typical)
@500mV: +/- 2% typical
@250mV: +/- 4% typical
@150mV: +/- 7% typical
Minimum Voltage Detected 150mV
 

ULTRA Industrial Specifications

Supply Voltage 2.0 - 3.8 VDC
Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
Battery Life Up to 10 Year Battery Life.**
Max Operating Temperature -40° to 85°C (-40° to 185°F)
Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
Solar Power Option 3.0 VDC Solar Panel
600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
Charging Temperature Range: 0° to 45°C (32° to 113°F)
Max Temperature Range: -20° to 60°C (-4° to 140°F)
Enclosure Material IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
UL Rating UL Listed to UL508-4x specifications (File E194432)
Dimension 3.7 in x 2.32 in x 1.38 in
 

ULTRA 900 MHz Specifications

Operating Frequency 900 MHz Operating Frequency
Certifications Complies with Part 15 of the FCC Rules.
Complies with Industry Canada standards.
Device Range Device Range Up to 1,200 ft. non-line-of-sight, wireless device range*
Security Encrypt-RF® (Diffie-Hellman Key Exchange + AES-128 CBC)

Specifications Image

What's in the box?
  • Wireless Sensor
  • Mounting Hardware
  • 3V Industrial Battery (Pre-Installed)
  • SMA Antenna


Join our community!

Get our latest news and events announcements, including training sessions, conferences, new product launches, as well as service updates.